How To Install Metal Roofing On A Steep Roof

If the plumbing vent is close to the peak of the roof lap the shingles over the peak of the roof.

How to install metal roofing on a steep roof.

And for any exposed fasteners try to avoid over tightening them. It isn t hard as long as you are careful take your time do it right and be safe. You will use metal roofing screws to secure the metal panels to the sheathing. Cut the shingles to fit around the flange s dome.

Adhere the shingles adjacent to the flange with roofing tar. Moreover try to ensure that the screws are all aligned evenly. Add the metal panels. A roofing harness provides the extra security you need when working on such a roof.

Preparing for a safe job on a steep metal roof requires an assessment of the roof before the job begins. Always begin working at the point with the longest peak to eave distance. Be sure the larger edge is laid so that the small edge of the next panel will overlap it. Take your first sheet of.

Align the first metal roofing panel so that it overlaps the edging by 1 2 to 3 4 of an inch and is square to the roof line. Try to space the screws about 12 inches apart down the entire piece of metal. Install the roofing screws vertically along each rib in the panel. Adhere the joint where the cut edges of the shingles meet the dome with roofing tar.

The edging or eave flashing consists of metal strips that are used to cover the perimeter of the roof. Use your 1 1 4.